Specializing in the production of various stainless steel pipes, plates, coils, rods, pipe fittings, high nickel alloy steel products, high temperature resistant products
Categories
Products
A203 Pressure Vessel Carbon Steel Coil
ASTM A203 Grade: A, B, D, E, F, Boiler VesselVolumeIt is a nickel alloy steel material used in the manufacture of high temperature pressure vessels. ASTM A203 Boiler VesselVolumeThe performance is based on its Ni composition. ASTM A203 Boiler VesselVolumeThere are five grades: A, B, D, E and F.
ASTM A203 Boiler Vessels for Grade A, B, D and E
VolumeAll shall be normalized as required. The chemical composition shall conform to the requirements of ASTM A203/A203M. Also, ASTM A203 Boiler VesselVolumeTwo mechanical property tests are required: a tensile test and an impact test.
A202 Pressure Vessel Carbon Steel Coil
ASTM A202 grade is divided into: A, B, boiler vessel coil is mainly used for welding boilers and other pressure vessels. There are two grades of ASTM A202 boiler vessel steel: Grade A and Grade B. ASTM A202 Boiler vessel coils are limited to a thickness of 2in, I .e. 50mm.
JIS G3101 SS400/SS490/SS540 Carbon Steel Coil
JIS G3101 SS400 is a common carbon structural steel grade. Other grades of JIS G3101 are ss330, ss490 and ss540. Relevant product types include steel coils, steel plates, steel sections, and steel pipes.
EN10025-2 S235/S275/S355 Carbon Steel Coil
EN10025-2 steel coil is a low-alloy high-strength structural steel, which is made of carbon structural steel (Wc = 0.16%~ 0.2%) by adding a small amount of alloying elements. EN10025-2 steel coil has good welding performance, plasticity, toughness and processing technology, good corrosion resistance, high strength and low cold brittle critical transition temperature.
GB/T700 GB/T1591 GB Material Carbon Steel Coil
GB/T700 Q275 carbon steel and low alloy steel coil equivalent material is S275JR steel plate. S275JR steel coil is a general purpose carbon structural steel. This steel is similar to the steels listed in China GB/T700 and GB/T1591. It is also a carbon structural steel and low alloy structural steel used in engineering steel and structural steel, which is usually not heat treated. GB/T1591 steel coil is a Chinese standardized low alloy medium tensile strength steel coil produced by hot rolling process. GB/T1591 steel coil has a variety of manufacturing purposes.
ASTM A573/A573M grades are divided into 58, 65 and 70. Steel coils are suitable for structural carbon-manganese-silicon steel plates with three tensile strength ranges. ASTM A573/A573M steel coils are mainly used for important purposes of improving notch toughness at room temperature.
DIN 17100 ST37/ST52 Carbon Steel Coil
DIN 17100 steel coils are suitable for flange beams, steel bars, steel strips, steel plates, wide flat steel, seamless steel pipes and welded steel pipes, square and rectangular hollow profiles. According to standards, DIN 17100 steel plates are used for welding, riveting and threaded structural parts. Except for stress relief heat treatment and normalizing, it is not used for heat treatment.
A709/S355J0W Carbon Steel Coil
ASTM A709 steel coil is in accordance with the standard specification for bridge structural steel, ASTM A709 steel coil is a carbon, high strength low alloy and quenched and tempered alloy steel mainly used in bridge construction. BBN offers the following 5 grades of steel coils: A709,36, 50, 50W, HPS 50W. The atmospheric corrosion resistance index of 50W, HPS 50W and HPS 70W are 6.0.
ASTM A656 steel coil is a high-strength low-alloy steel used in structural applications. In structural applications, light weight and good formability are essential. ASME A656 steel plates are manufactured in different grades of 50, 60, 70 and 80 steel coils with specified yield points.
ASTM A633 steel includes four grades: A, C, D, and E, of which the thickness of grade C can reach 4 inches and the thickness of grade E can reach 6 inches. ASTM A633 steel specification is based on the standard specification for standardized high-strength low-alloy structural steel plate, which requires high notch toughness under low temperature conditions.
ASTM A588 steel includes Class A, Class B, Class C, and Class K. The ASTM A588 steel specification is based on the standard specification for high-strength low-alloy structural steel with a lower yield point of up to 50ksi for applications requiring high strength and corrosion resistance
A572 grades are divided into: 42, 50, 60, 65. The steel plate is light in weight, but has good strength, ductility and workability, making it an ideal choice for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.
ASTM A514 steel is available in several grades: A, B, C, E, F, H, J, K, M, P, Q, S, and T, all of which have the same mechanical properties. ASTM A514 steel plates are conventionally quenched and tempered steel. ASTM A514 steel coil is known for its high yield strength, weldability and toughness, even at low temperatures. ASTM A514 steel is a special high-strength steel, mainly used as building structural steel.
A283/Q195 Carbon Steel Coil Description
A283/Q195 Carbon Steel Coil Description
ASTM A283 is a carbon steel coil used for general structural purposes. The steel has low and medium tensile strength. The ASTM A283 steel specification covers four structural quality grades of mild steel, grades A, B, C, and D, for general application.
A36/Q235/S235JR Carbon Steel Coil
A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the structural steel plate specified by the engineer. ASTM A36 steel plate is often manufactured into a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its yield point, A36 carbon plate can be used to design lighter-weight structures and equipment, and provide good weldability. Construction, energy, heavy equipment, transportation, infrastructure and mining are the industries where A36 panels are commonly used.
API Spec 5L Pipeline Steel Coil Steel Plate
API Spec 5L is an international standard that specifies the manufacturing requirements for two product specification grades (PSL 1 and PSL 2) of seamless and welded steel pipes used in pipeline transportation systems in the oil and gas industry.
EN 10083-3 4135/4140/4142/6150 Alloy Structural Steel Plate
EN 10083-3:2006 steel is an alloy steel used for quenching and tempering. This standard regulates the technical delivery conditions of alloy steels. Under the steel 50CrMo4, 51CrV4, 20MnB5, 34CrMo4, 42CrMo4, 27MnCrB5-2. EN 10083-3 steel plate has high strength, high toughness and good hardenability. The alloy requires high temperature preheating before welding to eliminate the stress after welding.
A588 Alloy Structural Steel Plate
GB/T 11251 alloy steel is one of the common hot-rolled alloy structural steel plates. GB/T 11251 Hot rolled plate has high strength and wear resistance, high hardenability, moderate cold deformation plasticity, good cutting performance and good welding performance. During the heat treatment, the toughness of the steel decreases less. GB/T 11251 alloy steel can still maintain high toughness under water cooling conditions, but it has a tendency of overheating sensitivity, white spot sensitivity and temper brittleness.
Request Quote
We will contact you within one working day. Please pay attention to your email.