Specializing in the production of various stainless steel pipes, plates, coils, rods, pipe fittings, high nickel alloy steel products, high temperature resistant products
Categories
Carbon steel sheet / plate
Carbon steel plate is a rectangular plate made of non-alloy material mainly composed of iron and carbon. In addition to carbon, it also contains a small amount of silicon, manganese, sulfur, phosphorus and other elements. The higher the carbon content, the better the hardness and the better the strength. Due to its good mechanical properties and plasticity, it is widely used in various fields.
API Spec 5L Pipeline Steel Coil Steel Plate
API Spec 5L is an international standard that specifies the manufacturing requirements for two product specification grades (PSL 1 and PSL 2) of seamless and welded steel pipes used in pipeline transportation systems in the oil and gas industry.
EN 10083-3 4135/4140/4142/6150 Alloy Structural Steel Plate
EN 10083-3:2006 steel is an alloy steel used for quenching and tempering. This standard regulates the technical delivery conditions of alloy steels. Under the steel 50CrMo4, 51CrV4, 20MnB5, 34CrMo4, 42CrMo4, 27MnCrB5-2. EN 10083-3 steel plate has high strength, high toughness and good hardenability. The alloy requires high temperature preheating before welding to eliminate the stress after welding.
A588 Alloy Structural Steel Plate
GB/T 11251 alloy steel is one of the common hot-rolled alloy structural steel plates. GB/T 11251 Hot rolled plate has high strength and wear resistance, high hardenability, moderate cold deformation plasticity, good cutting performance and good welding performance. During the heat treatment, the toughness of the steel decreases less. GB/T 11251 alloy steel can still maintain high toughness under water cooling conditions, but it has a tendency of overheating sensitivity, white spot sensitivity and temper brittleness.
A588 Alloy Structural Steel Plate
ASTM A588 steel is a high-strength low-alloy structural steel section, steel plate and bar used for welded, riveted or bolted structures. These steels are mainly used in welded bridges and buildings where weight reduction or increased durability is required. In most environments, the atmospheric corrosion resistance of this steel is significantly better than that of carbon structural steel with or without the addition of copper.
DIN 17155 Pressure Vessel Steel Plate
DIN 17155 pressure vessel steel plate is boiler and pressure vessel steel. In addition to boilers and pressure vessels, DIN 17155 pressure vessel steel is also used to manufacture high-temperature liquid transportation pipelines.
JIS G3103 P296GH/P355GH/P235GH Pressure Vessel Steel Plate
JIS G3103 Boiler Container Plate is a hot-rolled plate of carbon steel and molybdenum alloy steel for Chinese and high temperature boilers and pressure vessels. The main grades of JIS G3103 boiler vessel steel are: SB410, SB450, SB480,SB450M and SB480M.
A537 Pressure Vessel Steel Plate
ASTM A537 Boiler vessel plates are heat treated carbon manganese silicon steel plates used in pressure vessel fabrication. ASTM A537 Boiler Container Plate has 3 grades, namely Grade 1, Grade 2, and Grade 3.
A533 Pressure Vessel Steel Plate
ASTM A533 Boiler vessel plates are manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates suitable for welding pressure vessels. Often with quenching and tempering heat treatment, that is, quenching and tempering state supply. ASTM A533 boiler vessel steel is available in five different strength grades: Class A, Class B, Class C, Class D, and Class E. There are three levels of each category: level 1, level 2 and level 3.
A516 Pressure Vessel Steel Plate
ASTM A516 grades: 55, 60, 65, 70, is a high-quality boiler and pressure vessel steel, very suitable for low to medium temperature applications. The material is widely used by industrial boiler and pressure vessel manufacturers that provide manufacturing support for the oil, gas and petrochemical industries. The steel has good weldability and excellent notch toughness.
A515 Pressure Vessel Steel Plate
ASTM A515 is the same as ASME SA-515 and is the standard specification for welding carbon steel pressure vessel plates for high temperature service in boilers and other pressure vessels. A515/SA-515 plate can be divided into 3 grades according to its minimum tensile strength: grade 60, grade 65 and grade 70.
A387 Pressure Vessel Steel Plate
ASTM A387 Boiler vessel plates are chrome-molybdenum alloy steel plates suitable for welding boilers and high temperature pressure vessels. ASTM A387 boiler container plate is divided into grade 5, grade 9, grade 11, grade 12, grade 22, grade 91 and other grades according to the alloy elements contained. Except for grades 21L, 22L, 91 and 911, each grade of ASTM A387 boiler vessel plate has two tensile strength categories according to its heat treatment: Class 1 and Class 2.
A285 Pressure Vessel Steel Plate
ASTM A285 Boiler Plate is a common carbon steel used for fusion welding of pressure vessel equipment such as boilers, storage tanks, heat exchangers, etc. ASTM A285 Boiler vessel steel consists of 3 grades: Grade A, Grade B, and Grade C. ASTM A285 boiler vessel plates have good welding performance and can meet the fusion welding requirements of pressure vessel equipment.
A204 Pressure Vessel Steel Plate
ASTM A204 boiler vessel plate is molybdenum alloy steel plate, mainly suitable for welding boilers and high temperature pressure vessels. According to the molybdenum content, ASTM A204 boiler container plate is divided into 3 grades: A, B, C. The thickness of ASTM A204 boiler vessel plates is limited only by the ability of the chemical composition to meet the specified mechanical property requirements.
A203 Pressure Vessel Steel Plate
STM A203 grades are: A, B, D, E, F. Boiler vessel plates are nickel alloy steel materials used in the manufacture of high temperature pressure vessels. The performance of ASTM A203 boiler vessel plates is based on their Ni composition. ASTM A203 Boiler Container Plates are available in five grades: Grade A, Grade B, Grade D, Grade E, and Grade F.
ASTM A203 Boiler Container Plates for Grade A, B, D and E shall be normalized as required. The chemical composition shall conform to the requirements of ASTM A203/A203M. At the same time, ASTM A203 boiler container plate needs to do two mechanical properties test: namely tensile test and impact test.
A202 Pressure Vessel Steel Plate
ASTM A202 grade is divided into: A, B, boiler vessel plate is mainly used for welding boilers and other pressure vessels. There are two grades of ASTM A202 boiler vessel steel: Grade A and Grade B. The thickness of ASTM A202 boiler vessel plates is limited to 2in, I .e. 50mm.
JIS G3101 SS400/SS490/SS540 Carbon Steel Plate
JIS G3101 SS400 is a common carbon structural steel grade. Other grades of JIS G3101 are ss330, ss490 and ss540. Related product types include steel plate, steel plate, steel section, steel pipe, etc.
DIN 17100 ST37/ST52 Carbon Steel Plate
DIN 17100 steel plate is suitable for flange beams, steel bars, steel strips, steel plates, wide flat steel, seamless steel pipes and welded steel pipes, square and rectangular hollow profiles. According to standards, DIN 17100 steel plates are used for welding, riveting and threaded structural parts. Except for stress relief heat treatment and normalizing, it is not used for heat treatment.
Request Quote
We will contact you within one working day. Please pay attention to your email.